It is not the easiest task in the world to come up with fun things for your kids to do when it comes to outdoor activities when it is really hot outside. Few things compare to the fun your kids will have on an inflatable water slide.
What makes so much fun? It is quite simple really. Kids love water slides because they are giant and inflatable and wet. Many kids have never even seen inflatable water slides because they are so used to seeing standard bounce houses. The concept behind inflatable water slides is the same as that of bounce houses. Basically there is a blower motor in the back of the unit that blows up the giant vinyl slide and you put a hose at the top that went down the sliding surface. Inflatable water slides in the proper maintenance after use, can increase the life of the product, you need to pay attention to the following points:
A large inflatable toys put before gas, semi-clean towel toy surface, deflated after the dry, cool and clean place folded custody. If the water toys improper care, in the case can not be drained and put dry and ventilated place blows, the water evaporated until dry to avoid water stored; The blower should be stored in dry and ventilated place, avoid damp. Toys long-term storage, you should regularly check for moisture, and wipe clean should be blown in well-ventilated place.
After prolonged use of inflatable water slides, because some parts of the pinholes seam widening, the sharp rise in gas leakage, consider using strips of cloth attached to the joints, reducing air leakage, such as toys too old, you should consider retirement, operations to prevent problems. Air local anomaly towel projections generally refers to pull air from the torn open, can be sewn along the bottom cushion apart, stretching the cushion with needle and thread to connect, and then paste it with a cloth to protect the seam can be.