Inflatable castles, also known as bounce houses, provide kids with a controlled source of excitement and activity that is best fit for birthday parties and other celebrations where there are many kids. The inflated object enables kids to jump while nets on the side prevent kids from falling off onto hard ground. Overhead costs are low and a small amount of space is needed to set up an inflatable castle. Many party stores rent inflatable castle that contain fans that blow air. Your can install the inflatable castle as follows.
1 Clear a flat area free of jagged tree roots, rocks and other sharp objects. The area must be equal to the size of the base of the inflatable castle. Clear low branches that could pop the inflatable castle.
2 Plug in the inflatable castle's power cord to an outlet on the nearest building. According to Bounce Nashville, a standard 110-volt household outlet is sufficient, though no other objects should be plugged into the outlet. Typical cords are 50 feet long, the site says, so you will need a generator if the inflatable castle is farther than 50 feet from an outlet.
3 Allow the inflatable castle to inflate itself, and allow ample time before your event. Secure the inflatable castle to the ground so it does not move. You should drive in stakes on all four corners. Hammer the stakes halfway into the ground at 45 degree angles facing away from the inflatable castle. Afterwards, close all openings to the inflatable castle except one, making certain the velcro grips and stays closed.
+86-0371-85956138 sites:
+86-0371-85956138
