WOLONG AMUSEMENT EQUIPMENT CO.,LTD.
 +86-0371-85956138 sites:

Home > News

News

Inflatable equipment
Source:     Author:     Posted: 12-10-2015    Views:

Nowadays, inflatable equipment has become one of kids’ favorite toys, which also attractive merchants’ attention. Children are happy when playing inflatable equipment such as inflatable castle, inflatable slide, inflatable rock climbing, etc. Meantime, there are some instructions of inflatable equipment to which people should pay attention.

initpintu_副本.jpg


First, large inflatable equipment installation:
1, Will be placed in a flat on the ground equipment, the equipment is the best put a patch (such as carpet, plastic cloth, etc.), and then the spread;
2, Find the equipment of the air inlet, with the fan outlet connection, and the fan mouth lashes, again will spare air inlet with rope lashes;
3, The fan switch on the power, equipment in five to ten minutes will take.
 

Second, equipment cleaning collection:
1, Cut off the power supply, open the fan interface and air vent, evacuation time is in commonly 10 to 25 minutes, residual air to squeeze. If the equipment because of rain water, to make sure the water is clean and dry;
2, Cleaning, washing powder can be used the besmirch wipe, oil, grease, etc, and then with water scrub clean, dry sun can;
3, Equipment fold, with bottom stopped positive, reoccupy tarpaulin cover it good;
4, If not for a long time, the clean equipment fold, bundling, packing, storage temperature in general - fifty ~ + and ℃ advisable.


Third, maintenance measures:
1, In order to ensure that your equipment to normal life, in the boot when you play can't more than bearing capacity of children play;
2, Facilities of small model the adornment effect, had better not let the child hard pull, hard to avoid damaging the tear;
3 And the children play, can't let children with hard thing on the equipment of writing silly things, lest damage;
4, In case of equipment damage, can be in breakage and spare PVC material is coated with special glue, the glue 5 minutes not glue the hand, and the adhesive, appropriate extrusion, a few minutes can use;
5, Equipment pressure too soft, check if there is any leakage, too much tear hole, or power failure; Pressure is too hard to keep out a little of the fan air inlet.

Online Services Email